2CV CAMS

Karl Ellis · February 04, 2007, 16:54:56

Seen the comments about Camshafts

Just had 2 off done by Kent Cams. Done a nice job and price OK.

Have numbers stamped on one end.

Someone logging the numbers? Can email no problems

Karl Ellis

Trevor Williams · February 04, 2007, 17:04:38

Karl
Please send me the cam numbers
Thanks
Trevor

Karl Ellis · February 04, 2007, 21:24:25

Trevor

Will post cam numbers shortly. Will check out. They are with John Shuter

Any ideas on local teams.

I am always up and down country and in and out of London.

Karl

Karl Ellis · February 05, 2007, 21:28:16

Trevor

We have 2 cams done by Kent

RC 146
RC 147

Regards

Karl Ellis

Marc Fenner · February 05, 2007, 22:28:15

Where abouts are you?

Karl Ellis · February 07, 2007, 00:00:22

Hi mark

We are all based in West Midlands, between Wolverhampton and Birmingham.

Karl

Pete Sparrow · February 07, 2007, 00:32:16

Karl,
you'll find Simon Pearson in Warsall
his business is called The Two Pot Shop, he been racing for 13 or 14 years. look him up in the phone book or there may be some contact details on the website under specailists. He may be able to help you out when he's not counting his money. If you can find it let me know and i'll get you the details.

Karl Ellis · February 07, 2007, 23:01:57

Pete

Thanks for that mate. Trevor W. as also sent me this contact.

Great stuff! Will contact soon.

Car is now painted shell, but were starting to hang the bits back on!

Its a bit different to what i am use to but its good fun and an interesting
challenge. The charity bit is coming on good and we already raised a few
grand in sponsors for the charities.

Seen something about a Rally raid in a 2CV?

Anyone you know had a go at this ?

Karl :D :D

Pete Sparrow · February 08, 2007, 22:26:01

karl
there has been a few recently. there is a twin engined 2cv that has done the Dakar a couple of times but not been very reliable. Suspension arms broke this year i think. There is also a 2cv doing this years Paris-Peking rally owned by a guy called Simon Chance. He has done loads of stuff with this car and been very sucessful.I also built a car for the 1997 Paris-Peking, a 1300cc one that didn't do too badly but came back quite badly damaged, it cost close to 25k 10 years ago but it was a tool.
glad to hear you're getting on OK, some of us haven't started yet....